Additional power from the flue gas of a pyrolysis plant
ClinX Heat 150 with up to 150 kW power gross
Alongside our directly integrated Pyro-ClinX, power generation from existing processes is our second specialist field: ClinX Heat adds power generation to existing pyrolysis and carbonisation plants.
Project at a glance
| Project type: | Plant |
|---|---|
| Application: | Power generation at a pyrolysis plant |
| Technology: | ClinX Heat 150 with externally fired micro gas turbine |
| Client: | General contractor of an industrial carbonisation plant |
| Location: | Darmstadt, Hesse |
| Power: | 150 kW gross |
| Heat exchanger: | around 900 kW thermal |
| Implemented by: | pyropower group |

Additional power from the flue gas of a pyrolysis process
Starting point
An industrial carbonisation plant pyrolyses woody biomass into biochar, producing hot flue gas. Instead of letting this energy go unused, the aim was to generate additional power directly on site without disturbing the existing process.
Implementation
A custom-designed high-temperature heat exchanger with around 900 kW thermal output transfers the energy of the flue gas to clean, compressed air. This hot air drives an externally fired micro gas turbine and generates power. The turbine stays separate from the flue gas. The turbine exhaust air is recuperated and used further for energy, and other components provide heat recovery and process integration.
Result
The plant delivers up to 150 kW power gross plus usable heat. ClinX Heat thus adds a power generation stage to an existing pyrolysis plant and increases the energy efficiency of the site. On open days, visitors were able to see the plant in operation.
Power generation as a specialist field
Alongside the Pyro-ClinX, in which pyrolysis and power generation work together directly in one plant, power generation at existing pyrolysis and carbonisation plants is our second specialist field. Because the turbine only sees clean air, difficult gases are also suitable. At a tyre pyrolysis plant, for example, five ClinX Heat 150 use a fluctuating lean gas that could hardly be used in conventional engines. What matters is a continuous gas flow of around 750 kW per ClinX Heat 150.
[ Setup ]
How the project is set up

[ Impressions ]
The plant on site
The ClinX Heat plant uses the high-temperature heat of a carbonisation plant for additional power.
[ Knowledge ]
Recuperation: the turbine uses its own waste heat
- Compressor: draws in ambient air and compresses it
- Heat supply: in the high-temperature heat exchanger, without contact with the flue gas
- Turbine: expands the hot air and drives the generator
- Recuperator: preheats the compressed air with the turbine exhaust air
A micro gas turbine works according to the Joule cycle: air is compressed, heated and expanded in the turbine. The turbine drives the compressor and the generator. However, the exhaust air still leaves the turbine at a high temperature.
A recuperator uses this heat: it transfers it from the turbine exhaust air to the compressed air before it flows into the high-temperature heat exchanger. Less heat therefore has to be supplied from outside to reach the same turbine inlet temperature, and electrical efficiency rises considerably.
The externally fired micro gas turbine has an additional advantage: because only clean air flows through the compressor, recuperator and turbine, these components remain free of deposits from the process gas.
More about micro gas turbine development ›
From the blogPower generation in Darmstadt: ClinX Heat uses the flue gas of a carbonisation plantRead more ›
[ Technology ]
ClinX Heat 150
Power and heat from high-temperature waste heat from 900 °C: a heat exchanger transfers the heat to clean air, which drives an externally fired micro gas turbine.
150 kW power gross · max. 450 kW heat
[ References ]
Latest projects
Biochar production at an industrial site in Mecklenburg-Western Pomerania
Three Pyro-ClinX 150 plants produce power, heat and biochar from industrial wood residues at an industrial site in Mecklenburg-Western Pomerania.
PyroPark Forst
PyroPark Forst is being developed in Lusatia as an integrated energy site that converts woody residues into electricity, usable heat, biochar and certified carbon removal.
ClinX Heat Power Generation from a Carbonization Plant in Darmstadt
ClinX Heat uses high-temperature energy from an existing carbonization plant to generate additional electricity on site.
ClinX Heat project planning for a tyre pyrolysis plant in Greece
For a planned tyre pyrolysis plant in Greece, pyropower is planning five ClinX Heat 150 units that convert the pyrolysis gas into power and heat.