Decentralised systems In practice

Research project H2mGT: hydrogen in the combustion chamber of the micro gas turbine

Detail einer pyropower Mikrogasturbine

Contents

18.08.2026

Research project H2mGT: hydrogen in the combustion chamber of the micro gas turbine

Key facts in brief

  • The research project H2mGT focused on the combustion of hydrogen in micro gas turbines.
  • It ran from October 2020 to September 2023 and was funded by the German Federal Ministry for Economic Affairs and Energy.
  • The pyropower group’s sub-project was titled “Validation in real-world testing”.
  • The goal was a combustion concept that keeps the fast, hot hydrogen flame stable and protects the components.
  • The experience feeds into follow-up projects, such as the manufacture and testing of a hydrogen burner.
Sebastian Kießling, Geschäftsführer der pyropower GmbH

Sebastian Kießling
Managing Director Technology, pyropower GmbH

LinkedIn

A fast, hot flame

Hydrogen in micro gas turbines is a topic for everyone planning decentralised power and heat generation for the long term. Anyone investing in turbine technology today wants to know whether it can also handle future fuels. Hydrogen burns faster and hotter than natural gas. Combustion chambers designed for natural gas therefore cannot simply be reused. The flame has to remain stable, it must not flash back into the burner, and the components have to be protected from excessive temperatures. This is where the H2mGT research project came in, which is described on the H2mGT project page .

Then there is the question of emissions. Higher flame temperatures favour the formation of nitrogen oxides. A combustion concept for hydrogen therefore has to combine flame stability, component protection and low NOx values.

From combustion concept to real-world testing

The project ran from October 2020 to September 2023. It investigated how hydrogen can be burned in micro gas turbines. The pyropower group’s sub-project focused on the step from calculation to testing on a real machine. What works in simulation and on a laboratory burner first has to prove itself in a turbine with its pressure ratios and component temperatures. This transition decides whether a concept finds its way into application.

A report by energieforschung.de from May 2023 describes the status at that time: the burner is designed for 100 percent hydrogen and operated stably on a laboratory scale. Problems with centring the flame and with flashback were considered solved. Staged air supply was intended to keep nitrogen oxide emissions low. Test cycles on test rigs in Cottbus were planned for early summer 2023.

Partners and funding

H2mGT was funded by the German Federal Ministry for Economic Affairs and Energy. The report names Euro-K GmbH from Cottbus and Technische Universität Berlin as partners. The laboratory-scale tests ran on the combustion test rig at TU Berlin, and testing on the machine was planned on test rigs in Cottbus.

This combination is typical of applied energy research: the university contributes measurement technology and fundamental knowledge of combustion, the company contributes the machine, the test rig and a view of what ultimately has to work in operation. The pyropower group has been developing turbine technology since 2012 and has carried out further research projects around the Micro gas turbine , for example on ceramic and additively manufactured components.

Follow-up project: hydrogen burner

The experience from H2mGT has fed into later projects. In the project Hydrogen burner: manufacturing and test campaign , pyropower manufactured a third-version hydrogen burner for an industrial customer and tested it across the entire load range. The third version shows how development works in practice: design, build, measure, improve.

Knowledge of combustion chambers is also central to today’s plants. In the Pyro-ClinX , pyrolysis gas is burned in a separate combustion chamber, and the heat reaches the turbine via a high-temperature heat exchanger. How we work with flameless oxidation is described in the article on FLOX. Our engineering team is available for questions about burners and special gases.

More on this topic

Download

Brochure and data sheet Pyro-ClinX

Technical data, feedstocks, products and the course of a project at a glance (PDF).

Download brochure (PDF)