Decentralised systems In practice

Review after 30,000 operating hours: the test plant in Cottbus

Ingenieur an einer industriellen Anlage mit Wärmeversorgung

Contents

19.05.2026

Review after 30,000 operating hours: the test plant in Cottbus

Key facts in brief

  • The Cottbus test plant ran in continuous operation at our headquarters from 2017 to 2024, for a total of around 30,000 operating hours.
  • The plant also supplied our own production with power and heat. For this, ClinX Energy Systems received the Energy Efficiency Award of the State of Brandenburg in 2021.
  • Technology: a ClinX Wood 50 with externally fired micro gas turbine, built by ClinX Energy Systems GmbH and later operated by pyropower.
  • The plant was used for fuel tests, for developing components and for demonstrations to customers and partners.
  • It was modified several times, in 2020 for example with a new combustion chamber, flue gas fan and recooling system, and each change was tested in everyday operation.
  • The experience from continuous operation is now part of the Pyro-ClinX.
Sebastian Kießling, Geschäftsführer der pyropower GmbH

Sebastian Kießling
Managing Director Technology, pyropower GmbH

LinkedIn

A plant without customer pressure

Anyone developing a new energy technology needs a place where it can run every day without a customer depending on its heat or power. That was exactly the role of the Cottbus test plant. From 2017, a ClinX Wood 50 with externally fired micro gas turbine stood at our headquarters on Burger Chaussee. It was built by ClinX Energy Systems GmbH, which has been developing turbine technology since 2012 and was integrated into the pyropower group in 2024. Alongside the tests, the plant also supplied our own production with power and heat. For this self-supply, the production of ClinX Energy Systems received the Energy Efficiency Award of the State of Brandenburg in 2021. After around 30,000 operating hours, the plant fulfilled its purpose in 2024. All key data can be found on the project page for the test and demonstration plant.

The principle is the same for all ClinX plants: combustion takes place outside the turbine. A high-temperature heat exchanger heats clean, compressed air, which then drives the turbine and generator. Hot gas and working air remain separate; only heat is transferred. This process produces power and usable heat at the same time.

Fuel tests, components, demonstrations

In everyday operation, the plant had three tasks. It was a test rig for fuels, because how a wood assortment behaves in the combustion chamber only shows reliably in continuous operation, not in a short trial. It was a development environment for components that had to run under real conditions before being installed in customer plants. And it was a demonstration plant: customers and partners could see the technology in operation in Cottbus and talk directly with the team.

This point in particular was important for many conversations. A micro gas turbine that generates power with heat from wood is new for many businesses. A running plant often answers questions about space requirements, operation and maintenance faster than any data sheet.

Modifications during operation

The team modified the plant several times in-house. In 2020, for example, a new combustion chamber, a flue gas fan and a recooling system were added. These changes were not only assessed on paper but tested in daily operation. This made it possible to observe how the new components behaved over weeks and months and how they interacted with the rest of the plant.

For an engineering team, this is a major advantage: experience of behaviour in continuous operation is gained in-house and not at the customer’s site. What proves itself can go into series production. What does not yet fit is changed before it affects a customer plant. This approach still shapes development within the group today, including topics such as air bearings for micro gas turbines.

Experience for the Pyro-ClinX

In 2023, pyropower combined pyrolysis and turbine technology in the Pyro-ClinX. The knowledge from continuous operation in Cottbus is part of this system. The Pyro-ClinX 150 converts wood residues into power, heat and biochar. The pyrolysis gas is burned in a separate combustion chamber, and the heat reaches the micro gas turbine via the high-temperature heat exchanger. Because it is externally fired, the turbine never comes into contact with the pyrolysis gas.

The key data: 150 kW electrical output gross, max. 450 kW heat and a design for 8,000 operating hours per year. The biochar is produced in line with the EBC standard; which class is achieved depends on the residue used. You can read more about the turbine itself on the page Micro gas turbine.

For businesses considering a plant of their own today, this means: the technology behind the Pyro-ClinX is based on thousands of hours of real operation. We will be happy to show you what a project at your site could look like.

More on this topic

Download

Brochure and data sheet Pyro-ClinX

Technical data, feedstocks, products and the course of a project at a glance (PDF).

Download brochure (PDF)