Power for the grid and process heat from wood
ClinX 50 in Graubünden, implemented with Swiss ClinX
Project at a glance
| Project type: | Plant |
|---|---|
| Technology: | ClinX 50 with high-temperature heat exchanger and externally fired micro gas turbine |
| Project: | Swiss ClinX, distribution partner in Switzerland |
| Client: | Business in Switzerland |
| Location: | Canton of Graubünden, Switzerland |
| Utilisation: | Power for the regional grid, process heat for the business |
| Our scope: | Supply of the plant, support with engineering and service |
| Implemented by: | ClinX Energy Systems GmbH, pyropower group |

Grid feed-in and process heat from one plant
Starting point
A business in Switzerland needs heat for its processes and has wood available as fuel. This wood was also to be used to generate power for the regional grid.
Implementation
The project was implemented by Swiss ClinX, our distribution partner in Switzerland, which sells pyropower technology there. Our group of companies supplied the plant, supported the engineering and provides service. At its heart is a ClinX 50: a high-temperature heat exchanger transfers the heat from the combustion chamber to clean, compressed air, which drives an externally fired micro gas turbine.
Result
The ClinX 50 is designed to feed power into the regional utility’s grid and to supply process heat for the business. As part of the service, a new high-temperature heat exchanger was recently installed.
Service over the lifetime
The high-temperature heat exchanger operates at the highest temperatures in the plant. A service that can replace such components keeps the plant performing well in the long term.
[ Knowledge ]
Combined heat and power: power and heat from one fuel
- Combined heat and power: simultaneous generation of power and usable heat in one plant
- Overall efficiency: power plus heat used, in relation to the fuel energy input
- Power-to-heat ratio: ratio of power generated to heat used
With separate generation, power is produced in a power station whose waste heat usually goes unused, and the heat for the business comes from its own boiler. Combined heat and power (CHP) combines both: the heat that is physically unavoidable in power generation is used directly on site.
How well this works is shown by the overall efficiency. It depends less on the plant itself than on how much heat is actually used. CHP is therefore particularly suitable where heat is needed evenly over the year, for example in production processes.
The power-to-heat ratio describes the ratio of power to heat. For micro gas turbines it is usually lower than for gas engines. In return, the heat is available in a single exhaust stream at a comparatively high temperature level, which makes it attractive for process heat.
More about process heat applications ›
From the blogEnergy security for production sites: technologies for a stable supplyRead more ›
[ Technology ]
Pyro-ClinX 150
Pyrolysis and an externally fired micro gas turbine in one plant: power, heat and biochar from wood chips.
150 kW power gross · max. 450 kW heat · 600 t biochar per year
[ References ]
Latest projects
Biochar production at an industrial site in Mecklenburg-Western Pomerania
Three Pyro-ClinX 150 plants produce power, heat and biochar from industrial wood residues at an industrial site in Mecklenburg-Western Pomerania.
PyroPark Forst
PyroPark Forst is being developed in Lusatia as an integrated energy site that converts woody residues into electricity, usable heat, biochar and certified carbon removal.
ClinX Heat Power Generation from a Carbonization Plant in Darmstadt
ClinX Heat uses high-temperature energy from an existing carbonization plant to generate additional electricity on site.