Expertise Technology

pyropower and Capstone: the micro gas turbine, conventional and externally fired

Contents

13.10.2026

pyropower and Capstone: the micro gas turbine, conventional and externally fired

Key facts in brief

Capstone from California is our long-standing partner for micro gas turbines. At the beginning of October 2026, pyropower was a guest at the manufacturer’s partner meeting, where Sebastian Kießling gave a talk. A good opportunity to explain the principle: how a conventional micro gas turbine works and what the externally fired micro gas turbine in our plants does differently.

  • Capstone Energy+, based in Van Nuys, California, builds micro turbines on platforms with 30, 65 and 200 kW.
  • In a conventional micro gas turbine, the fuel burns directly in the machine.
  • In the externally fired micro gas turbine, combustion takes place outside, and only clean, hot air flows through the turbine.
  • This makes it possible to use wood, residues, pyrolysis gas and high-temperature waste heat without putting a strain on the turbine.
Sebastian Kießling, Geschäftsführer der pyropower GmbH

Sebastian Kießling
Managing Director Technology, pyropower GmbH

LinkedIn

Guests at the partner meeting in Los Angeles

On 5 and 6 October 2026, Capstone hosted the Powering ON Summit, the company’s business partner meeting. It took place at the headquarters in the Los Angeles area and at the Valley Relics Museum. Co-founder and Managing Director Technology Sebastian Kießling attended for pyropower and gave a talk. We report in detail in our news item on the Capstone Summit.

The visit ties in with our plans for the US market. pyropower already received an award in the Lausitz Goes International competition in 2024 for its route into the USA. The trip brought new contacts with partners who sell and service plants in North America.

According to its own figures, Capstone Energy+, formerly Capstone Green Energy, has delivered more than 10,600 units to 88 countries through its distribution network (company information, May 2026).

The principle of the conventional micro gas turbine

A micro gas turbine is a small gas turbine with a generator. A compressor draws in air and compresses it, fuel is added and burned in the combustion chamber, and the hot gas drives the turbine and generator. A recuperator, i.e. a heat exchanger between exhaust gas and intake air, preheats the air with exhaust heat and thus improves efficiency. The residual heat in the exhaust gas can be extracted as useful heat.

Capstone relies on air bearings: the shaft runs on a cushion of air, no external lubrication is needed, and the turbine generator has only one moving part (Capstone Energy+). Because the fuel burns directly in the machine, it has to be clean, such as natural gas, biogas or hydrogen. Ash, tar and pollutants from wood or residues would quickly damage the turbine.

Our approach: combustion outside the turbine

This is exactly where the externally fired micro gas turbine (EFGT) comes in. It moves combustion out of the machine. In the Pyro-ClinX the pyrolysis gas burns completely in a separate FLOX combustion chamber, flamelessly and at up to 1,200 °C. A high-temperature heat exchanger transfers the heat to the turbine’s compressed air. Gas and air remain separate, and only clean, hot air flows through the turbine. The warm turbine exhaust air then serves as combustion air in the combustion chamber.

With ClinX Heat the heat comes from existing high-temperature waste heat, for example from glassworks, cement plants or metal processing. Here too, the turbine components do not come into contact with the hot gas streams.

Development began in 2012 at ClinX Energy Systems. The first concepts for the EFGT were developed in 2014 and 2015, followed in 2018 by the EFGT200C variant based on a 200 kW micro turbine, designed for landfill gas with grid connection. In 2019, the technology received the Berlin Brandenburg Innovation Award.

A shared basis, our own development

Both approaches share the same basis: a compact turbine with a generator that supplies power and usable heat. Capstone is our long-standing partner for micro gas turbines, the heart of the Pyro-ClinX. The group of companies developed the external firing itself, and the combination of pyrolysis and micro gas turbine is patented.

In parallel, the group conducts research on turbine components, from ceramic parts and air bearings to hydrogen in micro gas turbines. Between 2013 and 2020, it delivered micro turbine generators and test rigs to customers in Asia. Plants from the group are now in operation in Europe and North America.

More on this topic

Download

Pyro-ClinX brochure and data sheet

Technical data, feedstocks, products and the course of a project at a glance (PDF).

Download brochure (PDF)